|
_________________________________________________________________________________
Super
Speedway 9"
Ford Rear
"The Ultimate
Race Proven Super Speedway Rear End"
"The Standard In
"Cup"
ALL
Carl's Rears Use
A New Center Section
Not A Used "Junkyard" Piece
________________________________________________
Designed and engineered for dependable, trouble free service
on 3400 lb. cars subject to the loads and stresses of Daytona and Talladega. All
come standard with DOM flex proof rear end tubes, vent and cooler fittings,
truck arm brackets and brake brackets installed on the straightened housing.
-
Lightest Super Speedway
Housing Available
-
Guaranteed To Be The
Straightest On The Market
-
All Tubes Are Properly
Aligned In The Center Section
-
All Housings Are Straightened
Before Shipment
-
.219 Wall Centerless Ground Tubes Are Standard
- .188 and .250 Wall Tubes Optional
-
Camber Is Available In .5,
.75, 1.0, 1.35, 1.5, 1.75 and 2 Degrees - either Positive or Negative
-
Tread Widths Can Be Built To
Meet Your Specifications
-
Toe Dimensions Will Be Set If
Needed
|
NO Leaks -
All Housings Pressure Tested !!
NOTE: Truck Arm And
Brake Brackets Are Guaranteed Aligned Correctly !!
***** NOTE: When using pre
cambered rears, camber becomes toe in
or toe out if you don't check the pinion
angle.
| Part
No. |
Description
|
Price |
Click
To Buy |
| WC100 |
Bare Housing - Non Camber Straight Snouts |
$640.00 |
|
| WC100C |
Bare Housing - Pre - Cambered, Snouts |
$670.00 |
|
| WC200 |
Housing with pads and brake
brackets. non camber straight snouts |
$1250.00 |
|
| WC200C |
Housing with pads and brake
brackets. pre cambered snouts |
$1250.00 |
|
| WC2400 |
Complete
rear with hubs, axles, drive plates. non cambered |
$2100.00 |
|
| WC2400C |
Complete
rear with hubs, axles, drive plates. pre cambered snouts |
$2100.00 |
|
Rear End Options
______________________________
Can't Find
What You Need ? Ask Us !!
|
