|
_________________________________________________________________________________
BGN
Short Track 9"
Ford Rear
"The UItimate
BGN Short Track
Rear On The Market Today"
________________________________________________
Designed and engineered for
dependable and trouble free service to handle the loads and stresses from
Nationwide or Craftsman Trucks. All
come standard with DOM flex proof rear end tubes, vent and cooler fittings, truck arm
brackets and brake brackets installed on the straightened housing.
ALL Carl's Rears Use
A New Center Section
Not A Used "Junkyard" Piece
-
Lightest BGN Short Track Housing Available
-
Guaranteed To Be The
Straightest On The Market
-
All Tubes Are Properly
Aligned In The Center Section
-
All Housings Are Straightened
Before Shipment
-
.219 Wall Centerless Ground Tubes Are Standard
- .188 and .250 Wall Tubes Optional
-
Camber Is Available In .5,
.75, 1.0, 1.35, 1.5, 1.75 and 2 Degrees - either Positive or Negative
-
Tread Widths Can Be Built To
Meet Your Specifications
-
Toe Dimensions Will Be Set If
Needed
|
NO Leaks -
All Housings Pressure Tested !!
NOTE: Truck Arm And
Brake Brackets Are
Guaranteed Aligned Correctly !!
***** NOTE: When using pre
cambered rears, camber becomes toe in
or toe out if you don't check the pinion
angle.
| Part
No. |
Description
|
Price |
Click
To Buy |
| BGN200 |
Housing with pads and brake
brackets. non camber straight snouts |
$575.00 |
|
| BGN200C |
Housing with pads and brake
brackets. pre cambered snouts |
$675.00 |
|
| BGN2400 |
Complete
rear with hubs, axles, drive plates, bearings and seals. non cambered straight
snouts |
$1300.00 |
|
| BGN2400C |
Complete
rear with hubs, axles, drive plates, bearings and seals. pre cambered snouts |
$1400.00 |
|
Rear End Options
Can't
Find What You Need ? Ask Us !!
|
