|
_________________________________________________________________________________
9" Ford Short
Track Rear End
"Nothing
Better At Any Price"
Built
To The Same Specifications
As Our Cup Rears, By Professionals
Don't
Be Fooled By Misleading Ads, Buy Genuine Carl's
And Stay In Front Of The
Pack
________________________________________________
ALL Carl's Rears Use A New
Center Section
Not A Used "Junkyard" Piece
-
All Tubes Are Properly
Aligned In The Center Section
-
All Housings Are Straightened
Before Shipment
-
Housings Come Standard With
Oil Filler And Cooler Fittings
-
.219 Wall Tubes Are Standard
- .188 and .250 Wall Tubes Optional
-
Camber Is Available In .5,
.75, 1.0, 1.35, 1.5, 1.75 and 2 Degrees - Either Positive or Negative
-
Tread Widths Can Be Built To
Meet Your Specifications
|
| Part
No. |
Description
|
Price |
Click
To Buy |
| GN100 |
Housing, no
brackets, non camber straight snouts |
$430.00 |
|
| GN100C |
Housing no
brackets, pre cambered snouts |
$565.00 |
|
| GN2400A |
Complete
rear with alum. hubs, bolt on rotor plate, axles, drive plates, bearings and
seals with non cambered straight
snouts |
$1100.00 |
|
| GN2400AC |
Complete
rear with aluminum hubs, bolt on rotor plate, axles, drive plates, bearings and
seals with pre cambered snouts |
$1425.00 |
|
| GN2400S |
Complete
rear with steel hubs, bolt on rotor plate, axles, drive plates, bearings and
seals with non cambered straight
snouts |
$1050.00 |
|
| GN2400SC |
Complete
rear with steel hubs, bolt on rotor plate, axles, drive plates, bearings and
seals with pre cambered straight
snouts |
$1375.00 |
|
*****Specify Camber
and Track Width When Ordering*****
Rear End Options
Can't
Find What You Need ? Ask Us !!
|
